Setup Windows CE 6.0 - Mini2440: Tips and Tricks for a Successful Installation

Mini 2440 comes preloaded with a SuperVivi bootloader in NOR flash.It is used to install Operating system on to NAND flash.SuperVivi is the BIOS for mini2440 & is used as a tool to download & burn OS image to the Flash onboard.

Setup Windows CE 6.0 - Mini2440

Download Zip: https://urlca.com/2vEMqA

2.Under Serial line enter the port number (in our case it is COM2).To know the port no. allotted ,open up Device manager & under Ports(Com&Lpt) you see the COM port number allotted to the USB-UART board we have used to connect DB9 of mini2440 to PC.

API (Application Programming Interface) mode is a frame-based method for sending and receiving data to and from an XBee.API MODE is powerful & complicated to setup.It is used to send messages to constantly changing targets (other XBee modules).

Currently, there are no changes necessary for ARM Trusted Firmware. To be able to build the ATF firmware, first you'll need to download and setup the GNU Toolchain for Hard Float Calling Convention. When the toolchain is installed and you have the CROSS_COMPILE, ARCH and PATH correctly pointing to it, you can proceed to build the firmware directly:

Important: Replace by the Platform for your specific configuration as indicated in the above table. Also, replace with the UART Base Address for your particular setup. 2ff7e9595c